Overview

The WatchDog 100-P is a self-contained unit with built-in PoE and on-board temperature and humidity/dew-point sensors. It has an input capacity of eight external sensors and an output of one NO/NC relay contact for triggering external devices like an auto-dialer.

Like with all other ITWatchDogs environmental monitors, the WatchDog 100-P allows users to keep an eye on remote conditions from a secure web interface and receive SNMP, E-mail, text message and voice call* alert notifications when user-adjustable thresholds are exceeded.

The web interface provides an overview of environmental measurements with real time sensor data. All measurements are logged allowing users to collect data for trending and capacity management. The WatchDog 100-P offers flexible access rights and security settings with up to three access account levels. It offers secure access through the web and supports HTTP and HTTPS protocols. Up to 50 customizable alarms can be configured with alarm escalations per sensor.

The WatchDog 100-P features four 0—5VDC / dry-contact analog inputs and one digital sensor port. Up to four digital sensors can be connected using a standard splitter. A variety of optional plug-and-play sensors are available for use with the WatchDog 100-P including but not limited to, temperature, humidity, airflow, water and smoke detection sensors, door position, power failure and more. One of the unique features of the WatchDog 100-P is its relay contact port used to energize or de-energize an external device.

At just 1U high and approximately 8.5" wide, the WatchDog 100-P is a compact solution perfect for tight installments. The WatchDog 100-P is shipped with rack-mount brackets offering flexible wire management options.

Easily view and log temperature, relative humidity / dew point and external sensors over the intranet or the Web. No software required - securely access the graphical user interface from a web browser.

Built-in Power over Ethernet (PoE) converges power and data in between the switch and the WatchDog 100-P, eliminating the need for electrical wiring. Power adapter is provided for applications without PoE support.

SNMP, Email, SMS & Voice Alerts
The WatchDog 100 can trigger escalating alarms if temperature or humidity fall outside of specified parameters via SNMP (v1, v2c), email and SMS messages (e-mail-to-SMS gateway). Pure SMS or voice call notifications could be triggered in conjunction with ourrelay-controlled auto-dialer.

Interface Network IP Cameras
The Web page interfaces up to four IP cameras, allowing you a quick view of remote conditions, especially useful in event of alarm.

No Software Required
The WatchDog 100-P is simple to install and use, requiring no special software other than a standard Web Browser. The WatchDog 100-P connects to an Ethernet Network with a standard RJ45 connector and sends data in standard TCP/IP packets. It is easily configured with a simple menu using a Web Browser and can be password protected with 3 access account level types: Administrator, Control, View Only. From within an Intranet or over the Internet, the user can securely access the monitor by entering its IP address.

* requires an Auto-Dialer

10e-1.pg.jpg

Specifications
On-board Sensors:
Temperature: -22 to 185 °F (-30 to 85 °C), +/- 0.5 °C
Humidity: 0 to 100%, +/- 2%

Power: PoE or 6VDC power supply (included)
Ethernet: 10/100 Mbps, RJ-45 receptacle
Real Time Clock (RTC) with power backup
Reset IP push-button: restores factory defaults
Standards: FCC Part 15, 802.3fc (PoE)
Warranty: 1 year (extended warranties available)

Software Features:
HTTP/HTTPS: web access
Alarms: high/low values, multiple thresholds per sensor
ESMTP: email alerts, ESMTP auth
SNMP (v1, v2c): gets, trap and clear alerts, MIB
Paging: email to pager proxy
XML: meta-tagged sensor values, alarms, config
Syslog: send debug messages to Syslog server
Access-control: 3 access levels (admin, control, view only)
Web cams (optional): Up to four can be displayed
Compatible with WatchDog Console Aggregator

Features Coming Soon (2013): Several new features are planned to become available in 2013, including support for IPv6 and SNMPv3. Existing customers will be able to add these new features to their WatchDog 100/100P units via a firmware update.

Specifications

Additional Info

Accessories

IT WatchDog Temperature Sensor (12') -# 8179 Provides real-time temperature values from -40°C to 85°C or -40°F to 185°F. Quantity 010203040506070809101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899 Add to Order

Related Products

Warranty Info