I.T. Solutions since 1986

Home > StaticWorx
Manufacturer
StaticWorx
Product #
sw46099
Catalog #
sw46099
Weight
0.0 lbs.
Suggested Retail
$0.00
Sale Price
Contact Us
Quantity

SmartCoat Conductive Acrylic Floor Coating

4 x 1 Gal. case


Overview

SmartCoat combines permanent conductivity, durability and value for applications requiring an inexpensive, easily installed ESD floor coating. Despite the low cost, SmartCoat meets or exceeds all the recommended guidelines for static control flooring in ANSI/ESD S20.20. SmartCoat ESD floors are durable, attractive and they can be applied over most flooring materials including concrete, wood and old tile. The most impressive aspect of SmartCoat is the ease of application. It's as simple to install as conductive acrylic paint but it also provides the durability you expect from permanent ESD floors.

NOTE: This product is not recommended for applications that experience reoccurring standing water. Finished floors may be opened to light traffic, under normal curing conditions, after 12 hours. Complete curing with maximum durability and chemical resistance will take 5-7 days.

Application and Maintenance
New concrete floors should be allowed to cure a minimum of thirty days. Application to floors colder than 60 F is not recommended. Floor surfaces must be free of any release agents, curing compounds, salts or efflorescence before coating. Sweep and then wash floors with an appropriate cleaning product to remove oil, grease, and soil. Follow by etching surface with an etching solution, then thoroughly rinse with clean water.

If floor has been previously coated, a small area should be cleaned, roughed up by screen disking with an 80 Grit screen, and then sealer applied to test for adhesion, lifting, etc. Any areas of the existing coating which display poor adhesion should be stripped. Wash the stripped areas, acid etch, and rinse thoroughly. Allow the floor to dry.

Catalyzed SmartCoat should be used within six hours of mixing, therefore, prepare only the quantity necessary for immediate use. Add premeasured catalyst to epoxy base. Stir gently until the catalyst has been thoroughly mixed in. Allow catalyzed SmartCoat to stand for 5 minutes.

Apply catalyzed SmartCoat with a short nap roller in thin, uniform coats. The initial coat will cover approximately 400-500 ft2 per gallon. Allow the initial coat to dry for 5-7 hours, then apply a second coat. Second coat coverage is approximately 500-600 ft2 per gallon.

Specifications

  • 4 x 1 Gal. case

    • Additional Info
    Accessories
    Warranty Info

     

    All pricing subject to change. For all prices, products and offers, Mainline Computer Products 460 Village Park Powell Ohio reserves the right to make adjustments due to changing market conditions, product discontinuation, manufacturer price changes, errors in advertisements and other extenuating circumstances.

    High volume bids are welcome. Call (800)-686-5312, Ext. #228 or e-mail: Sales@mldelivers.com

    While Mainline Computer Products Inc. makes reasonable efforts to include accurate and up-to-date information on the site, Mainline makes no warranties or representations as to the site's accuracy. Mainline assumes no liability or responsibility for any errors or omissions in the content on the Site.

    Home > StaticWorx
    Logos Logos