Overview

Description:
Lowell's LPT2-19 Series Pull and Turn mounting system for built-in wall and millwork applications features a turntable on two heavy-duty slides for smooth pullout access to rack mounted equipment.

Sturdy and versatile system is engineered for efficient onsite installation. It is packaged unassembled in two cartons so that the bottom base (with slides and integral turntable) along with two rear corner post rails and three cable lacing bars can be sent ahead to the job site and installed in a boxed wall opening or cabinet. The second carton contains the rack base, front and rear posts, side
stiffeners, front vent panel and three lacing bars to assemble the rack for pre-loading and testing of equipment in the shop - a real benefit for corporate boardroom and training facility installations.

The bottom base installs using (8) screws and may be mounted flush or recessed up to 2" into a boxed wall or cabinetry to allow for equipment protrusions (see page 2). The removable
rack base, with or without mounted equipment, easily docks and secures to the bottom base using two screws on the front and rear frame (no wing nuts under the rack). When all equipment
is in place and wired, the assembly is secured in fixed position with two screws through a perforated front security panel. To facilitate wiring and servicing of rack equipment, the security panel may be removed; allowing the rack to be pulled out smoothly from the wall or millwork on the heavy-duty
slides. A convenient pushbutton lock and release, accessible in the center front of the bottom base, allows the rack to rotate 60º and 90º on the turntable. Note the rack must be fully forward
to rotate with adequate clearance. If it is recessed up to 2" it will not rotate the full 900. When servicing is complete, use the pushbutton to return the rack to its front-facing position,
push it back into the wall and re-install the front security panel.

Components are manufactured from certified US steel and finished in smooth black powder epoxy. Choose models with panel space of 10, 12, 16 or 21RU. All provide 19" useable depth
(19.22" overall). See also LPT4 Series 19" and 23"D versions
with 4-slides (300lb load).

LPT2-19 Series Pull & Turn Slide-out Rack System - 19"D with 2-Slides

System Includes:
 Bottom Base with Turntable & 2 Heavy-duty Slides for 150lb load.
 Rack Base (removable)
 6 Corner Post Rails (10-32) and 2 Side Stiffeners
 Cable Lacing Panels: 6 Qty.
 Front Security Panel: Perforated
 Powder Epoxy Finish: Smooth Black

17.50" 10RU 20.08" 19.13" 19.22" 19.00" 150lbs.

Specifications

Additional Info

Accessories

Related Products

Warranty Info